HOW YOU NEED TO DO SIMPLE WATER PIPE REPAIR WITH MAINTENANCE

How You Need To Do Simple Water Pipe Repair With Maintenance

How You Need To Do Simple Water Pipe Repair With Maintenance

Blog Article

Have you ever noticed how many people consider working as a plumber? This is mainly because plumbers are being paid a big amount of money for their services. Some people thinK that plumbing is a dangerous and dirty job, but for these plumbers, this is a good job, where they could earn a decent amount of money.

4) You will need to have on hand toilet tape, small gas torch, solder, flux, plumbing sandpaper, pipe cutter, gas tape (to seal gas line) and maybe some pipe glue. Ask the sales person at the hardware store for a more defined list.

There are two, one on each side of the toilet, closet bolts which hold the toilet to the floor. If there are caps over the bolts, remove or pop them open. Using a small crescent wrench unscrew the nuts from the bolts. Alternate side to side when unscrewing this will be much more important when reinstalling the water line repair bolts but alternate anyhow.



Another obvious indicator is if the water you get is close to cold as ice, then your water heating device has already reached its maximum level of service. If it can talk, it might have been shouting at the top of its voice telling you it needs replacement.

Depending on your repair job you might need a bucket that will fit below the sink trap, as well as some rags and newspaper. Masking tape is useful for labeling and for wrapping around the heads of the wrench to protect your chrome tap handles. Rubber gloves are recommended, particularly when working with the toilet, but there are greases and glues that you may not want on your hands.

A broken water supply line can cause water to spurt from the line connecting the toilet to the main water valve. The first step to repair this leak is to shut off the water line repair supply valve. This will stop the flow of water to the toilet. Next, flush the toilet to remove the water from the bowl and hold down the handle until it is completely empty.

The work area should always be clean and free of trash and clutter. The cleaner and less clutter there is in a Plumbers' work area, the better able a plumber will be to make sure that his job goes as smoothly as possible.

Bottom line is that it is now very easy for even a desk jockey to fix his own pipes. Go by the closet home improvement store on your way home. Pick up some of these fittings and impress the wife with talents that she did not know you had. You may even get brave and do that small plumbing project that she has been begging for. Now you can use these fittings to cut into that water line to run that new outside faucet or hookup that water filter yourself. With the push type fitting plumbing has been made easy enough for anyone to be able to do it.

Report this page